• Your shopping cart is empty!

  • Inspire 2000 Wood Insert

Inspire 2000 Wood Insert

  • Brand: Osburn
  • Product Code: OB02045
  • Availability: In Stock
  • Wood Safety Guide
  • Inspire Insert Manual
  • Inspire Fireplace Instructions
  • Inspire Insert Dimensions

Available Options


Inspire 2000 Wood Insert

Features
• Chimney diameter : 6"
• Dimensions - Overall : 25 1/8"H X 30 1/8" W X 21 1/8"D
• Average particulate emissions rate : 1.54 g/h
• Maximum log length : 20"
• Fireplace opening - minimum (Height X Width X Depth) : 23 3/4" X 28 7/8" X 19 5/8"
• Shipping Weight : 484 lbs
• Recommended heating area (sq.ft.) : 500 à 2,100
• Maximum burn time : 8 h
• Blower included : Yes
• Firebox nominal volume (cu. ft.) : 2.4

Website

Manual

General Features

High-efficiency EPA certified appliance Yes
Maximum log length 20"
Log positioning Over width
Chimney diameter 6"
Minimum chimney height (feet) 12'
Baffle type C-Cast
Approved for an alcove installation N.A.
Approved for a mobile home installation No
Shipping Weight 484 lbs
Door type Single, glass with cast iron frame
Glass type Ceramic glass
Glass surface – dimensions (Width X Height) 20 1/4" X 9 1/2"
Glass air-wash system Yes
Overall dimension (Height) 25 1/8"
Overall dimension (Width) 30 1/8"
Overall dimension (Depth) 21 1/8"
Door opening – dimension (Height) 8 1/4"
Door opening - dimension (Width) 20"
Firebox – dimension (Height) 11 7/8"
Firebox – dimension (Width) 21 1/4"
Firebox – dimension (Depth) 16 7/8"
Firebox lined with refractory bricks for better heat distribution Yes
Stainless-steel secondary-air system improving gas combustion Yes
Adjustable threaded legs Yes
Steel thickness – body 3/16"
Steel thickness – top 5/16"
Fireplace opening – minimum (Height) 23 3/4"
Fireplace opening – minimum (Width) 28 7/8"
Fireplace opening – minimum (Depth) 19 5/8"
USA standard (emissions) EPA Method 28
Canadian Standard (emissions) CSA B415.1-10
USA standard (safety) UL 1482, UL 737
Canadian standard (safety) ULC S628
Tested and listed as per applicable standards By an accredited laboratory (CAN/USA)
Warranty Limited lifetime
Minimum clearances to combustibles*
(Data expressed in inches. 1 inch = 25.4 mm)
  Canada United-States
Clearance – top (measured from the platform on which the appliance is installed)** N.A. N.A.
Clearance – combustible side mantle to unit 9" 9"
Clearance – combustible top mantle to unit 27" 27"
Clearance – combustible side wall to unit 16" 16"
Clearance – minimum floor protection in front of the appliance 18" 16"
Clearance – top shelf to unit 27" 27"

* The information given on the certification label affixed to the appliance always overrides the information published in any other media (owner's manual, catalogues, flyers, magazines and/or web sites).

** Some appliances have been tested with a low ceiling. Before setting up your unit, refer to the installation manual.