Inspire 2000 Wood Insert
- Brand: Osburn
- Product Code: OB02045
- Availability: In Stock
- Wood Safety Guide
- Inspire Insert Manual
- Inspire Fireplace Instructions
- Inspire Insert Dimensions
Available Options
6" Stainless Steel All Fuel (Liner Only)
Stainless Steel Liner Only Width: 6" L..
6" Stainless Steel All Fuel Liner (Kit)
National Chimney All Fuel Liner Kit Width: 6" ..
6" Stainless Steel Pre-Insulated Liner (Kit)
National Chimney 6" Stainless Steel Pre-Insulated ..
Inspire 2000 Wood Insert
Features
• Chimney diameter : 6"
• Dimensions - Overall : 25 1/8"H X 30 1/8" W X 21 1/8"D
• Average particulate emissions rate : 1.54 g/h
• Maximum log length : 20"
• Fireplace opening - minimum (Height X Width X Depth) : 23 3/4" X 28 7/8" X 19 5/8"
• Shipping Weight : 484 lbs
• Recommended heating area (sq.ft.) : 500 à 2,100
• Maximum burn time : 8 h
• Blower included : Yes
• Firebox nominal volume (cu. ft.) : 2.4
Website
Manual
General Features
| High-efficiency EPA certified appliance | Yes |
| Maximum log length | 20" |
| Log positioning | Over width |
| Chimney diameter | 6" |
| Minimum chimney height (feet) | 12' |
| Baffle type | C-Cast |
| Approved for an alcove installation | N.A. |
| Approved for a mobile home installation | No |
| Shipping Weight | 484 lbs |
| Door type | Single, glass with cast iron frame |
| Glass type | Ceramic glass |
| Glass surface – dimensions (Width X Height) | 20 1/4" X 9 1/2" |
| Glass air-wash system | Yes |
| Overall dimension (Height) | 25 1/8" |
| Overall dimension (Width) | 30 1/8" |
| Overall dimension (Depth) | 21 1/8" |
| Door opening – dimension (Height) | 8 1/4" |
| Door opening - dimension (Width) | 20" |
| Firebox – dimension (Height) | 11 7/8" |
| Firebox – dimension (Width) | 21 1/4" |
| Firebox – dimension (Depth) | 16 7/8" |
| Firebox lined with refractory bricks for better heat distribution | Yes |
| Stainless-steel secondary-air system improving gas combustion | Yes |
| Adjustable threaded legs | Yes |
| Steel thickness – body | 3/16" |
| Steel thickness – top | 5/16" |
| Fireplace opening – minimum (Height) | 23 3/4" |
| Fireplace opening – minimum (Width) | 28 7/8" |
| Fireplace opening – minimum (Depth) | 19 5/8" |
| USA standard (emissions) | EPA Method 28 |
| Canadian Standard (emissions) | CSA B415.1-10 |
| USA standard (safety) | UL 1482, UL 737 |
| Canadian standard (safety) | ULC S628 |
| Tested and listed as per applicable standards | By an accredited laboratory (CAN/USA) |
| Warranty | Limited lifetime |
| Minimum clearances to combustibles* (Data expressed in inches. 1 inch = 25.4 mm) |
||
| Canada | United-States | |
| Clearance – top (measured from the platform on which the appliance is installed)** | N.A. | N.A. |
| Clearance – combustible side mantle to unit | 9" | 9" |
| Clearance – combustible top mantle to unit | 27" | 27" |
| Clearance – combustible side wall to unit | 16" | 16" |
| Clearance – minimum floor protection in front of the appliance | 18" | 16" |
| Clearance – top shelf to unit | 27" | 27" |
|
* The information given on the certification label affixed to the appliance always overrides the information published in any other media (owner's manual, catalogues, flyers, magazines and/or web sites). |
||
|
** Some appliances have been tested with a low ceiling. Before setting up your unit, refer to the installation manual. |
||
Matrix Wood Insert
Matrix Wood Insert Features Dimensions&..
2000 Wood Insert
2000 Wood Insert Features Dimensions : 23 ..
S20I Wood Insert
S20iThe S20i is the perfect solution for those loo..