6" Length (4x6)

6" Pipe Length (galvanized) Designed for applia..

8" Adjustable Length (4x6)

8-1/2" Pipe Extension (galvanized) ADJASTABLE U..

9" Length (4x6)

9" Pipe Length (galvanized) Designed for applia..

12" Length (4x6)

12" Pipe Length (galvanized) Designed for appli..

16" Adjustable Length (4x6)

4X6 Diameter 16" Pipe Extension ADJUSTABLE Used..

18" Length (4x6)

18" Pipe Length (galvanized) Designed for appli..

11" to 17" Adjustable Length (4x6)

11" - 17" Adjustable Pipe/w welded seam Use to ..

17" to 24" Adjustable Length (4x6)

17" - 24" Adjustable Pipe w/ welded seam..

2' Foot Pipe Length (4x6)

24" Pipe Length (galvanized) Designed for appli..

3' Foot Pipe Length (4x6)

36" Pipe Length (Galvanized) Designed for appli..

4' Foot Pipe Length (4x6)

48" Pipe Length (galvanized) Designed for appli..

5' Foot Pipe Length (4x6)

60" Pipe Length (galvanized) Designed for appli..

3' Foot (36") Co-Axial Flex Length (4x6)

36" Flex Pipe Length (Galvanized) VERSATILITY &..

5' Foot (60") Co-Axial Flex Length (4x6)

60" (5') Flex Pipe Length (Galvanized) VERSATIL..

10' Foot Co-Axial Flex Length (4x6)

120" (10') Flex Pipe Length (Galvanized) VERSAT..

Standard Appliance Connector (4x6) 3"/3"

Standard Appliance Connector 3" x 3"..

Adjustable Roof Flashing 0/12 - 6/12 (4x6)

Adjustable Roof Flashing 0/12 - 6/12..

Steep Roof Flashing 7/12 - 12/12 (4x6)

Steep Roof Flashing 7/12 - 12/12..

Adjustable Roof Flashing 0/12 - 6/12 Dead-Soft Aluminum (4x6)

DSA Flashing 0/12 - 6/12Best for Metal Roof..

Steep Roof Flashing 7/12 - 12/12 Dead-Soft Aluminum (4x6)

DSA Flashing 7/12 - 12/12..

Square Horizontal Termination Cap (aluminum) (4x6)

Square Horizontal Termination Cap (aluminum)..

High-Wind Termination Cap (4x6)

High-Wind Termination Cap..

Vertical Termination Cap (4x6)

Low-Profile Termination Cap (aluminum)..

Round Horizontal Termination Cap Square Base (aluminum) (4x6)

Round Horizontal Termination Cap Square Base (alum..

Extended Vertical Termination Cap (4x6)

Extended Vertical Termination Cap..

Snorkel Termination Cap 14" (4x6)

Snorkel Termination Cap 14"..

Snorkel Termination Cap 36" (4x6)

Snorkel Termination Cap 36"..

Cathedral Ceiling Support Box (4x6)

Cathedral Ceiling Support Box Use to pass throu..

Q2

Top or Rear vent optional

Fan/Remote is Included with Q2 IPI

Black Enameled Steel Liner comes with the Q2G-S

ORDERING NOTES
• The Q2 Fireplace can be installed without a face or surround panel.
• Q2LI-S2 include Slim Face Painted Black, no liner.
• Q2GI-S2 include Slim Face Painted Black & Black Enameled Liner.
• ASK MHD for Q2L-S2 and Q2G-S2 "standing pilot" stove pricing
and availability if needed. (special order only)

Features

Clean Face Look - No Louvers
Standing Pilot
Hand Welded Firebox
Limited Lifetime Warranty

Specifications

Heating Area 1400 ft²
BTU's 24000
Efficiency 67%
Glass Size 553 in²
Convection Fan Optional
Dimensions 34” x 13” x 30”

Options

Q2 Minimal Surround
H 28.8" x W 33.2"
Q2 Modern Surround
H 30.5" x W 37"
High Definition Log Set Burner
Glass Burner Tray
(Top Vent Configuration Only)
Ceramic Brick Liner (Log Set)
Black Enameled Steel Liner (Log Set)
Optional Fan Kit
150 CFM Fan

BROCHURE

MANUAL

DIMENTIONS

Side-By-Side Comparison

General Features
BTU's	24,000
Heating Area	1,400 Sq FT.
Efficiency	62%
Unit Dimensions (Height)	30"H
Unit Dimensions (Width)	35"W
Unit Dimensions (Depth)	16"D
Venting Size	4" x 6 5/8" Directvent (46DVA)
Remote	Yes for IPI models Optional for Standing Pilot
Blower	Optional

Q2

Available Options

Q2

Request for